2014 Honda Accord Hybrid Brake Pads in Orlando, FL

A squeal or scrape should be checked before the friction material is exhausted. Grinding means the friction material is gone and the backing plate is contacting the rotor, so stop driving and book brake service. An inspection determines whether the pads, rotors, hardware, and fluid also need attention.

• Measure remaining pad material on all four corners.
• Check rotors and calipers for related wear.
• Review hardware and brake fluid condition.

Checking every corner helps identify uneven wear before replacement. The braking system is assessed together because replacing pads while overlooking damaged or worn related components can shorten the life of the new parts. The condition found during inspection determines the appropriate service.

• Remaining pad material measurement at all four corners.
• Replacement pads matched to the vehicle’s braking system.
• Inspection of rotors, calipers, hardware, and fluid condition.

City traffic, towing, hills, and hard stops all shorten pad life. There is no single driving pattern that determines when replacement is needed. Measuring the remaining material on all four corners is the practical way to decide whether service is needed now or at a later visit.

• Frequent stop-and-go driving increases brake use.
• Hills and heavy loads can increase stopping demand.
• Inspection measures actual remaining pad material.

The rotors are inspected with the pads, along with the calipers, hardware, and brake fluid. If worn pads have allowed the backing plate to contact a rotor, the rotor may require additional service. Assessing the full system helps protect the performance and service life of the replacement pads.

• Inspect rotors for condition related to pad wear.
• Check calipers and hardware at the same visit.
• Review brake fluid condition before completing service.

A squeal, scrape, longer pedal travel, or longer stopping distance warrants prompt inspection. Grinding indicates the friction material is gone and the backing plate is on the rotor, which can create further damage. Brake pads, rotors, calipers, hardware, and fluid should be assessed together.

• Stop driving when grinding is present.
• Arrange an inspection after unusual brake noise.
• Have all four corners measured for remaining material.

The service visit includes measurement of the remaining pad material on all four corners and inspection of the related braking components. Coggin Honda Orlando is at 11051 S. Orange Blossom Trail, Orlando, FL 32837. You can also review current service specials before requesting your visit.

• Request brake pad inspection online.
• Call the Orlando service center directly.
• Bring the vehicle in for measured brake-system findings.